M60A
TWO
STATION WRIST STRAP MONITOR SYSTEM |
 |
|
|
Features
 |
Continuous,
independent monitoring of one or two work stations |
|
Individual
status indicators with audible and visual alarms |
|
Instant
detection of wrist strap and coil cord intermittence and failures |
Benefits
|
Operates
with all wrist straps/ground leads using standard banana plugs |
|
Each channel
is activated when wrist strap is plugged into the monitor |
|
Satisfies
ISO 9000 requirements |
|
| The
M60A Two Station Wrist Strap Monitor System continuously
monitors one or two ESD work surfaces and one or two conductive
wrist straps to detect loss of continuity. Conditions such as ungrounded
work surfaces, broken or disconnected coil cords, unsafe paths to
ground, and improper wearing of grounding equipment by operators
are detected instantly to alert the operator to take corrective
action before serious and expensive losses occur due to ESD and
grounding faults. |
| The
compact M60A independently monitors two work stations with
a common control/alarm module. Individual green “status OK” and
red “fault” LEDs for each work station, operator and work surface
give continuous indication of work surface and wrist strap/coil
cord grounding status. |
| An
audible alarm sounds to alert the operator when a failure condition
is detected. Each satellite module has an additional grounding jack
for visitors. |
|
DESCRIPTION
|
PART
NUMBER |
| Two
Station Wrist Strap Monitor System |
M60A |
|
|
|
|
|
