TRUSTAT™ 5100 Series 3-Ply Static Dissipative ESD Control Mats are made of a unique, layered construction with a static dissipative top vinyl surface combined with an electrically conductive inner layer. The 5100 Series delivers outstanding electrical performance to aid in dissipating static charges to ground in a rapid, yet controlled manner.
TRUSTAT™ Floor and Table Mats are supplied with two female snaps installed for connection of Series 4710 or 4720 Ground Leads. Each mat is individually packaged with one ground lead and installation and care instructions. TRUSTAT™ Runners are packaged in 50’ rolls and do not include snaps or ground leads (available separately from RICHMOND). One (1) ground lead is recommended for each 10 linear feet for optimum performance. For more information on grounding hardware, request product specification for TRUSTAT™ Series 4700 grounding accessories.
For efficient control of static on personnel, the use of RICHMOND conductive heel/sole grounders or other conductive footwear is recommended with all TRUSTAT™ Floor Mats and Runners.
SPECIFICATIONS:
Thickness:
.080"
Temperature Ranges:
Operating 40°F to 100°F
(5°C to 38°C)
Storage 23°F to 150°F
(-5°C to 65°C)
Note: Allow mat to acclimate to room temperature before unrolling.
ELECTRICAL PROPERTIES:
RESISTANCE TOP-TO-GROUNDABLE POINT (RTG):
10 Volts 12% RH >1.0 x 107 ohms
<1.0 x 109 ohms
100 Volts 50% RH >1.0 x 106 ohms
<1.0 x 108 ohms
RESISTANCE BETWEEN TWO POINTS ON SURFACE (RTT):
10 Volts 12% RH >1.0 x 107 ohms
<1.0 x 109 ohms
100 Volts 50% RH >1.0 x 106 ohms
<1.0 x 108 ohms
RESISTANCE GROUNDABLE POINT-TO-GROUNDABLE POINT (RSS):
10 Volts 12% RH >1.0 x 103 ohms
<1.0 x 105 ohms
100 Volts 50% RH >1.0 x 103 ohms
<1.0 x 105 ohms
PHYSICAL PROPERTIES:
Composition:
Static dissipative vinyl with conductive inner layer.
Weight:
0.8 lb/ft²
Hardness Shore A:(ASTM
D 2240)
80
Tensile Strength:(ASTM D 412)
640 psi min
Elongation:(ASTM D 412)
150% min.
Tear Resistance(ASTM
D 624 Die C)
135 lb/in min.
Chemical Resistance
Excellent
This document is prepared for our customers as a service, and is to the best of our knowledge true and accurate. However, it is understood and agreed by the users of this document that we will accept no liability for the conclusions reached. In addition, the products discussed are sold without warranty, expressed or implied, and this document is not to be construed as making any such warranties. Users of this document may therefore wish to perform additional testing before determining that products mentioned are suitable.