|
|
 |
| ESD WRIST STRAP MONITORS & CHECKERS |
|
|
|
|
|
M60B
DUAL OPERATOR WORKSTATION CONTINUOUS MONITOR |
<< go back |
|
Features
 |
Continuous,
independent monitoring of one or two work stations |
|
Individual
status indicators with audible and visual alarms |
|
Instant
detection of wrist strap and coil cord intermittence
and failures |
Benefits
|
Operates
with all anti-static wrist straps/ground leads using standard
banana plugs |
|
Each
channel is activated when wrist strap is plugged
into the monitor |
|
Satisfies
ISO 9000 requirements |
|
The Dual Operator Workstation Continuous
Monitor is a real time instrument that ensures that
critical ESD control components in a sensitive area are
effectively grounded. It independently
monitors the operator and the work surface. The instant
an operators wrist strap or cord fails ,
the monitor will issue audible and visual alarms alerting
the user of the problem. In the same
manner, the unit also confirms that a path to ground of
less than 10 megohms (1 x 10E7 ohms)
exists from the ESD protective worksurface(s). |
Note: Work surface must have a conductive
layer such as Dual Layer Rubber or Dissipative
3-Layer Vinyl or Micastat® Dissipative Laminate with
conductive buried layers.
Monitors are not recommended for use with homogeneous matting. |
|
DESCRIPTION
|
PART NUMBER |
| The Dual Operator Workstation Continuous Monitor |
M60B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
